Question: How can I program the remote control to operation my TV's power and volume?
Answer: 1. Press and hold the mute and TV (power) button until the LED blinks twice
2. Enter the 4-digit code for your brand of TV (see listings below)
3. If a valid code has been entered, the LED at the top of the remote will blink twice.
4. If an invalid code has been entered, there will be one long blink and the remote will revert to the previously programmed code.
5. To test the code, press the TV (power) button on the remote control
6. If the TV turns on/off, programming is complete.
7. If the TV does not turn on/off, try another code for your brand of TV. Not all TVs can programmed this way (you might have to use JP1).
8. To clear all settings, press mute + TV (power) then press 9-8-1.
Codes can be found here:
Codes for TV (1 of 2):
http://img300.imageshack.us/img300/1143/screencapture1oz9.png
Codes for TV (2 of 2):
http://img122.imageshack.us/img122/4521/cap2kw0.png
Codes TV/DVD and TV/VCR combination units:
http://img78.imageshack.us/img78/6400/cap3yl3.png
Posted by: Anonymous [tgodkin@gmail.com] at 11/08/2007 at 20:25:26 reply
I wish I could get my replay 5040 remote work with my X2Gen. Any ideas?